HEYCLean Liquid Tight Snap-In Vent Plugs

Material: Nylon 6/6 bodies with and Acrylic Copolymer Filter

Certifications:

File E330194

Flammability Rating: 94V-2

Temperature Range: -40°F to 221°F (-40°C to 105°C)

Ingress Protection Rating: IP 65/67/68

Quick and easy Snap-in installation into Clearance Holes.
Integral sealing ring ensures a superior seal at mounting hole location, every time; IP65, IP67 and IP68 Rated.
Permit the passage of air for ventilation and heat dissipation, yet remains liquid tight.
Maximum air flow: ≥16.6 Lpm/3.7cm² @ 13.5 psi.
UL Rated for Type NEMA3R, 4, and 4X applications.
Suitable for indor or outdoor use.
Pressure compensating seal prevents buildup of pressure inside of electronic enclosures due to environmental temperature cycling.
Filter membrane prevents moisture and particulate contamination in electronic enclosures.
Filter membrane is ultrasonically welded to nylon body.
All sizes and types feature (6) .094" (2,4 mm) diameter vent holes.
Snap-In plugs for panel and housing applications.
Lower cost option over brass or steel plugs.
Snap into a range of panel thicknesses up to .125" (3,2 mm) with no tools.
Rotation prevented when used in "Double D" mounting holes.
Filter membrane material consists of a Hydrophobic/Oleophobic Acrylic Copolymer.
Non-corrosive-resist salt water, weak acids, gasoline, alcohol, oil, grease and common solvents. Resist oil and heat up to 221°F (105°C).