Phone (800)-558-4388
Fax (262)-820-1070
Fax (262)-820-1070
Brass Cord Grips| Thread | Cable Range | Compression Nut |
|---|---|---|
| mm | Nm | |
| PG 7 | 3.5 - 5.0 | 4 |
| 5.0 - 6.5 | 5 | |
| 6.5 - 8.0 | 3 | |
| PG 9 | 3.5 - 4.5 | 7 |
| 4.5 - 6.0 | 6 | |
| 6.0 - 8.0 | 5 | |
| 8.0 - 10.5 | 3 | |
| 6.0 - 10.5 | 4 | |
| PG 11 | 4.0 - 5.5 | 8 |
| 5.5 - 8.5 | 7 | |
| 8.5 - 12.0 | 5 | |
| 5.5 - 12.0 | 5 | |
| PG 13 | 6.0 - 8.0 | 10 |
| 8.0 - 11.0 | 9 | |
| 11.0 - 15.0 | 5 | |
| 8.0 - 15.0 | 5 | |
| PG 16 | 6.0 - 8.0 | 10 |
| 8.0 - 11.0 | 9 | |
| 11.0 - 15.0 | 5 | |
| 8.0 - 15.0 | 5 | |
| PG 21 | 9.5 - 12.5 | 10 |
| 12.5 - 16.0 | 10 | |
| 16.0 - 20.5 | 4 | |
| 12.5 - 20.5 | 7 | |
| PG 29 | 16.0 - 19.0 | 10 |
| 19.0 - 23.0 | 8 | |
| 23.0 - 27.5 | 8 | |
| 19.0 - 27.5 | 8 | |
| PG 36 | 21.5 - 26.0 | 40 |
| 26.0 - 30.5 | 30 | |
| 30.5 - 35.0 | 30 | |
| 26.0 - 35.0 | 30 | |
| PG 42 | 29.0 - 33.0 | 40 |
| 33.0 - 37.0 | 30 | |
| 37.0 - 42.0 | 30 | |
| 33.0 - 42.0 | 40 | |
| PG 48 | 32.0 - 37.0 | 50 |
| 37.0 - 43.0 | 40 | |
| 43.0 - 49.0 | 40 | |
| 37.0 - 49.0 | 40 |
The specified torques are maximum values for compression nuts. These nuts should be tightened until the torque specified in the table is reached OR until the sealing insert protrudes slightly over the compression nut. Intermediate connecting pieces (lower part of cable gland) and lock nuts should be tightened with the greatest torque for the respective thread size and protected against inadvertent loosening.