Phone (800)-558-4388
Fax (262)-820-1070
Fax (262)-820-1070
Feet with Snap-In Locking Fingers
Material: EPDM Rubber insert, Nylon 6/6 Body
Flammability Rating: HB
Temperature Rating: -40°F to 221°F (-40°C to 105°C)
- Snap-in design eliminates the installation labor needed for a screw or a rivet, saving assembly time and equipment.
- Superior mounting approach as the Snap-In Bumper mounts securely into the panel while providing a strong mechanical support to the bumper when used as a mounting foot for electronic enclosures.
- Superior hold versus adhesive backed or screw/rivet bumpers.
- Designed to fit snugly into panel and is dust tight.
- Snap-In Bumpers are skid and scratch resistant and will not mark or stain surfaces.
- Locks firmly into enclosure.
- Quick and easy installation.
- Suitable for metal or plastic panels.
- Bumper constructed of EPDM rubber.
- Part Description Key:FSSI XX-YY-ZZ where
- XX = Overall Height (inches),
- YY = Mounting Hole Diameter (inches) and
- ZZ = Maximum Panel Thickness (inches)
| Panel Dimensions | Part Number |
Description | Part Dimensions | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mounting Hole Diameter |
Thickness Range | A Overall Height |
B Bottom Diameter |
C Top Diameter |
|||||||
| in. | mm. | in. | mm. | Black | in. | mm. | in. | mm. | in. | mm. | |
| .312 | 7,9 | .03 - .06 | 0,8 - 1,6 | G3016 | FSSI 19-31-06 | .19 | 4,7 | .500 | 12,7 | .812 | 20,6 |
| G3017 | FSSI 25-31-06 | .25 | 6,4 | ||||||||
| G3018 | FSSI 38-31-06 | .38 | 9,5 | ||||||||
