Heyco Bumpers & Feet Rubber Push-In BumpersType T
Type T Rubber Push-In Bumpers

Material: SBR or EPDM (see table below)

Temperature Rating: -40°F to 221°F (-40°C to 105°C)

 
  • Rubber bumpers designed for through hole installation.
  • Designed to fit snugly into your opening and not let air, water, etc. pass through.
  • Can also be used as feet.
  • Part Description Key:RGB X-Y-Z where
    • X = Mounting Hole Diameter (inches),
    • Y = Base Diameter (inches) and
    • Z/32 = Base Height (inches)
Heyco® Rubber Push-In Bumpers
Type T
Panel Dimensions Part
Number		 Description Material Part Dimensions Type
Mounting
Hole Diameter		 Maximum
Thickness		 A
Base Diameter		 B
Base Height		 C
Insert Diameter		 D
Insert Height
in. mm. in. mm. Black in. mm. in. mm. in. mm. in. mm.
.118 3,0 .10 2,5 G2000 RGB 118-236-4 EPDM .24 6,0 .12 3,0 .20 5,0 .47 12,0 T1
.177 4,5 .06 1,5 G2006 RGB 177-334-9 SBR .33 8,5 .30 7,5 .24 6,0 .73 18,5
.187 4,7 .05 1,2 G2009 RGB 187-250-6 .25 6,4 .19 4,7 .25 6,4 .34   8,7 T2
.218 5,5 .13 3,2 G2017 RGB 218-875-6 .88 22,2   .17 4,3 .34 8,7 .48 12,3 T1